Support materials to be used in leather goods to provide strength, structure and durability.

Support Materials

Lefapel Extra

Leatherboard

  • Ecological leatherboard material, ideal for supporting leather goods in general, with high density and pastiness, calendered with satin finishing on both sides.

    • Excellent tensile and tear resistance

    • Very soft and flexible hand

    • Thicknesses: from 0.3 to 1mm

    • Colours: Leather and Anthracite

Lefapel SL

Leatherboard

  • Ecological material in leatherboard ideal as a support in bags and small leather goods. Slightly calendared on one side, it has moderate traction and tear resistance. Suitable for the production of economic items.

    Also supplied in adhesive and thermoadhesive.

    • Thicknesses: 0.3, 0.4, 0.6, 0.8, 1mm

    • Colours: Leather and Anthracite

Cellsan Leather Goods

Cellulose Board

  • Cellulosic reinforcement material used as a structural support for bags, suitcases and backpacks.

    • It can be used to stiffen the base of bags, ensuring strength, lightness and shape

    • Thicknesses: from 0.5-1mm

    • Colours: White and Black

    • Sheet size: 100x150cm

Mecsint

Cellulose Fibreboard

  • 100% post-consumer recycled FSC cellulose. Excellent flatness and dimensional stability of the sheets, high seam and gluing strength. Suitable for reinforcement in leather goods, especially for bottoms and dividers.

    • Thicknesses: 0.5-3mm

    • Colours: Black, Red, Ecru

PI.TEX Pidisoft 2B

Extruded Material

  • Material composed of a base of thermoplastic polymers supported by two non-woven layers. It maintains a softer and less “noisy” hand, guaranteeing the roundness and memory of the shapes.

    • Inalterability from any atmospheric effect (humidity, hot / cold)

    • Non-deformability even when subjected to repeated stresses (bending)

    • Thermoformability between 70 - 110 ° C

    • Softness to the touch keeping the body during the skiving and sanding operation

    • Composition: TNT + thermoplastic polymers

    • Thicknesses: 0.3, 0.5, 0.7, 0.9mm

    • Roll length: 150cm

    • Colours: Black and White

    Also available with thermo-adhesive.

PI.TEX Pidifilm 2G

Extruded Material

  • High strength extruded material composed of a plastic film laminated with non-woven material on both sides. Suitable for construction of the “shaft” of bags or where it is necessary to maintain roundness and structural memory.

    Also available with thermo-adhesive.

    • Inalterability from any atmospheric effect (humidity, hot / cold)

    • Non-deformability even when subjected to repeated stresses (bending)

    • Thermoformability between 70 - 110 ° C

    • Softness to the touch keeping the body during the skiving and sanding operation

    • Composition: TNT + thermoplastic polymers

    • Thicknesses: 0.45, 0.65, 0.85mm

    • Roll length: 150cm

    • Colours: White

Previous

Filling Materials
Next

Fabrics